Zamewar Zoben Ta Hanyar Bore DHK012-Ⅱ
Bayanin Samfurin Zane-zanen Zamewa na DHK012-Ⅱ Ta Hanyar Zamewa
Zaɓen zamewa na DHK012-Ⅱ a cikin rami, Ramin ciki 12.7mm, diamita na waje 60mm, ya dace da tsarin lantarki mai juyawa tare da diamita ƙasa da 12.7mm, Tsarin yau da kullun yana goyan bayan zoben wuta 1-30 (0-20A/zobe) ko zoben sigina 1-4 (0~5A/zobe).
Aikace-aikacen da Aka saba
injunan lanƙwasa, na'urorin daukar hoto na laser, kyamarorin da ke cikin bututu, kayan aikin nuni/nunawa, zoben zamewa na injin siyarwa, kayan aikin duba gani na CCD, tsarin gani mai wayo, injunan haɗa abubuwa ta atomatik, fitilun LED masu juyawa, injunan lakabi, kayan aikin gwaji, kayan aikin gwajin halittu, da duk wata na'ura da ke buƙatar juyawa 360° don gudanar da wutar lantarki ko watsa siginar sarrafawa daban-daban.
Bayanin Sunayen Samfurin
- (1) Nau'in samfur: DH—zoben zamewa na lantarki
- (2) Hanyar Shigarwa: Ramin K-ta hanyar
- (3) Diamita na ramin da aka yi da ramin: 012-12 mm
- (4)Jimillar da'irori: da'irori 6-6
- (5) Gano lamba: --XXX; Domin bambance takamaiman bayanai daban-daban na samfurin iri ɗaya, ana ƙara lambar shaida bayan sunan. Misali: DHK012-6 yana da saitin samfura guda biyu masu suna iri ɗaya, tsawon kebul, mahaɗi, hanyar shigarwa, da sauransu sun bambanta, zaku iya ƙara lambar shaida: DHK012-6-002; idan akwai ƙarin wannan samfurin a nan gaba, da sauransu -003, -004, da sauransu.
Zane na 2D na yau da kullun na DHK012-Ⅱ Ta hanyar Zamewa Zoben Bore
Idan kuna buƙatar ƙira ƙarin zane na 2D ko 3D, da fatan za a aiko mana da imel, injiniyan mu zai yi muku shi nan ba da jimawa ba, na gode
Sigogi na Fasaha na Zoben Zamewa ta Hanyar Bore
| Teburin Matsayin Samfuri | |||
| Matsayin samfurin | Gudun aiki | Rayuwar aiki | |
| Janar | 0~200 rpm | Juyin juya hali miliyan 20 | |
| Masana'antu | 300~1000rpm | Juyin juya hali miliyan 60 | |
| Sigogi na Fasaha | |||
| Fasaha ta lantarki | Fasaha ta injiniya | ||
| Sigogi | darajar | Sigogi | darajar |
| Adadin zobba | Na musamman | Zafin aiki | -40℃~+65℃ |
| Matsayin halin yanzu | 2A, 5A, 10A, 15A, 20A | Danshin aiki | %70 |
| Ƙarfin wutar lantarki mai ƙima | 0~240VAC/VDC | Matakin kariya | IP54 |
| Juriyar rufi | ≥1000ΜΩ@500VDC | Kayan harsashi | Aluminum Alloy |
| Ƙarfin rufin | 1500VAC@50Hz,60s,2mA | Kayan hulɗar lantarki | Karfe masu daraja |
| Darajar canjin juriya mai ƙarfi | <10mΩ | Bayanin jagora | Teflon mai launi |
| Gudun aiki | 0-600rpm | Tsawon gubar | 500mm+20mm |
Teburin Bayani na Wayar Zamewa ta Hanyar Bore
| Teburin Bayyana Waya | ||||
| Matsayin halin yanzu | Girman waya (AWG) | Girman mai jagoranci (mm²) | Launin waya | Diamita na waya |
| ≤2A | AWG26# | 0.15 | Ja, rawaya, baƙi, shuɗi, kore, fari, launin ruwan kasa, launin toka, lemu, shunayya, haske, ja, mai haske | Φ1 |
| 3A | AWG24# | 0.2 | Ja, rawaya, baƙi, shuɗi, kore, fari, launin ruwan kasa, launin toka, lemu, shunayya, haske, ja, haske, shuɗi fari, fari ja | Φ1.3 |
| 5A | AWG22# | 0.35 | Ja, rawaya, baƙi, shuɗi, kore, fari, launin ruwan kasa, launin toka, lemu, shunayya, haske, ja, haske, shuɗi fari, fari ja | Φ1.3 |
| 6A | AWG20# | 0.5 | Ja, rawaya | Φ1.4 |
| 8A | AWG18# | 0.75 | Ja, rawaya, baƙi, launin ruwan kasa, kore, fari, shuɗi, launin toka, lemu, shunayya | Φ1.6 |
| 10A | AWG16# | 1.5 | Ja, rawaya, baƙi, launin ruwan kasa, kore, fari | Φ2.0 |
| 15A | AWG14# | 2.00 | Ja, rawaya, baƙi, launin ruwan kasa, kore, fari | Φ2.3 |
| 20A | AWG14# | 2.5 | Ja, rawaya, baƙi, launin ruwan kasa, kore, fari | Φ2.3 |
| 25A | AWG12# | 3.00 | Ja, rawaya, baƙi, shuɗi | Φ3.2 |
| 30A | AWG10# | 6.00 | Ja | Φ4.2 |
| −30A | Yi amfani da wayoyi AWG12# da yawa ko wayoyi masu yawa na AWG10# a layi ɗaya | |||
Bayanin tsawon waya mai gubar:
1.500+20mm (Bukatar gabaɗaya: Auna tsawon waya daga ƙarshen fuskar ramin fitar da waya na zoben ciki da na waje na zoben zamewa).
2. Tsawon da abokin ciniki ya buƙata: L <1000mm, Daidaitaccen L+20mm
L>1000mm, Daidaitaccen L+50mm
L>5000mm, Daidaitaccen L+100mm
Jerin Zane-zanen Zane-zanen Zane-zanen DHK012-Ⅱ Ta Hanyar Zamewa ta Bore Slip Zobe da Ingiant ya bayar da shawarar.
| Lambar Abu | Lambar Zobe | Tsawon 2A | Tsawon 5A | Tsawon 10A | Tsawon 15A | Tsawon 20A |
| DHK012-6 | 6 | 27.4 | 28.6 | 30.4 | 33.4 | 36.4 |
| DHK012-12 | 12 | 39.4 | 41.8 | 45.4 | 51.4 | - |
| DHK012-18 | 18 | 51.4 | 55 | - | - | - |
| DHK012-24 | 24 | 63.4 | 68.2 | - | - | - |
Bayanin Mai Gudanarwa: 2A tare da mai gudanar da Teflon mai launi AWG26#, 5A tare da mai gudanar da Teflon mai launi AWG22#
10A yana amfani da na'urar sarrafa Teflon mai launi AWG18# (ko kuma na'urar sarrafa PVC mai launi mai sassauƙa AWG16#)
15A yana amfani da na'urar sarrafa Teflon mai launi ta AWG16# (ko kuma na'urar sarrafa PVC mai launi mai sassauƙa ta AWG14#)
20A yana amfani da na'urar sarrafa Teflon mai launi ta AWG14#.
Tsawon haɗuwar samfur tare da adadin tashoshi na daban-daban (n2, n5, n10, n15, n20) (mm):
L=15.4+2*n2+2.2*n5+2.5*n10+3*n15+3.5*n20
