Zamewar Zoben Zamewa Mai Ƙaramin DHS013-50
Bayanin Zoben Zamewa Mai Zafi Na DHS013 -50 Micro Flange
Ingiant DHS013 Series diamita na waje 13mm, ya ƙunshi tashoshi 1-72 masu daidaitaccen zamewa mai sarrafawa, yana tallafawa siginar da watsawa gauraye na wutar lantarki, yana iya keɓance adadin da'irori da ƙarfin lantarki na yanzu bisa ga samfuran yau da kullun.
Aikace-aikace na yau da kullun
Jiragen sama marasa matuƙa, na'urorin daidaita abubuwa, gidaje masu wayo, sa ido kan tsaro, ɗaukar hoto da bidiyo, robot, kayan gwaji, na'urorin juyawa da kayan aiki na sarrafa kansa. da sauransu.
Bayanin Sunayen Samfurin
- (1) Nau'in samfur: DH—zoben zamewa na lantarki
- (2)Hanyar Shigarwa: Zoben zamewa mai ƙarfi na S
- (3) Diamita na waje na zoben zamewa mai ƙarfi na shaft: 013-13 mm
- (4)Jimillar da'irori: da'irori 50-50
- (5) Za a yi wa wutar da aka ƙima alama ko kuma ba za a yi mata alama ba idan ta ratsa ta wata wutar da aka ƙima daban don da'irori.
- (6) Gano lamba: --XXX; Domin bambance takamaiman bayanai daban-daban na samfurin iri ɗaya, ana ƙara lambar shaida bayan sunan. Misali: DHS013-50-1A-002 yana da saitin samfura guda biyu masu suna iri ɗaya, tsawon kebul, mahaɗi, hanyar shigarwa, da sauransu sun bambanta, zaku iya ƙara lambar shaida: DHS013-50-1A-002; idan akwai ƙarin wannan samfurin a nan gaba, da sauransu -003, -004, da sauransu.
Zane na Zamewa na Zane na DHS013-50 Micro Flange Zobe na 2D na Daidaitacce
Idan kuna buƙatar ƙira ƙarin zane na 2D ko 3D, da fatan za a aika bayanai zuwa gare mu ta imel[an kare imel], injiniyan mu zai yi muku aiki nan ba da jimawa ba, na gode
Sigogi na Fasaha na Zamewa Zoben Ƙaramin Flange na DHS013-50
| Teburin Matsayin Samfuri | |||
| Matsayin samfurin | Gudun aiki | Rayuwar aiki | |
| Janar | 0~200 rpm | Juyin juya hali miliyan 10 | |
| Masana'antu | 300~1000rpm | Juyin juya hali miliyan 30 | |
| Sigogi na Fasaha | |||
| Fasaha ta lantarki | Fasaha ta injiniya | ||
| Sigogi | darajar | Sigogi | darajar |
| Adadin zobba | Zobe 50 ko Musamman | Zafin aiki | -40℃~+80℃ |
| Matsayin halin yanzu | 0.8A | Danshin aiki | %70 |
| Ƙarfin wutar lantarki mai ƙima | 0~240VAC/VDC | Matakin kariya | IP51 |
| Juriyar rufi | ≥200ΜΩ@500VDC | Kayan harsashi | Bakin karfe |
| Ƙarfin rufin | 500VAC@50Hz,60s,2mA | Kayan hulɗar lantarki | Karfe masu daraja |
| Darajar canjin juriya mai ƙarfi | <10mΩ | Bayanin jagora | 5A a kowace da'ira tare da AF-0.15 mm², hutawa da AF-0.05 mm² |
| Gudun aiki | 0-300rpm | Tsawon gubar | 300mm+15mm |
Teburin Bayani na Wayar Zamewa ta Micro Flange ta DHS013-50
| Teburin Bayyana Waya | ||||
| Matsayin halin yanzu | Girman waya (AWG) | Girman mai jagoranci (mm²) | Launin waya | Diamita na waya |
| ≤2A | AWG26# | 0.15 | Ja, rawaya, baƙi, shuɗi, kore, fari, launin ruwan kasa, launin toka, lemu, shunayya, haske, ja, mai haske | Φ1 |
| 3A | AWG24# | 0.2 | Ja, rawaya, baƙi, shuɗi, kore, fari, launin ruwan kasa, launin toka, lemu, shunayya, haske, ja, haske, shuɗi fari, fari ja | Φ1.3 |
| 5A | AWG22# | 0.35 | Ja, rawaya, baƙi, shuɗi, kore, fari, launin ruwan kasa, launin toka, lemu, shunayya, haske, ja, haske, shuɗi fari, fari ja | Φ1.3 |
| 6A | AWG20# | 0.5 | Ja, rawaya | Φ1.4 |
| 8A | AWG18# | 0.75 | Ja, rawaya, baƙi, launin ruwan kasa, kore, fari, shuɗi, launin toka, lemu, shunayya | Φ1.6 |
| 10A | AWG16# | 1.5 | Ja, rawaya, baƙi, launin ruwan kasa, kore, fari | Φ2.0 |
| 15A | AWG14# | 2.00 | Ja, rawaya, baƙi, launin ruwan kasa, kore, fari | Φ2.3 |
| 20A | AWG14# | 2.5 | Ja, rawaya, baƙi, launin ruwan kasa, kore, fari | Φ2.3 |
| 25A | AWG12# | 3.00 | Ja, rawaya, baƙi, shuɗi | Φ3.2 |
| 30A | AWG10# | 6.00 | Ja | Φ4.2 |
| −30A | Yi amfani da wayoyi AWG12# da yawa ko wayoyi masu yawa na AWG10# a layi ɗaya | |||
Bayanin tsawon waya mai gubar:
1.500+20mm (Bukatar gabaɗaya: Auna tsawon waya daga ƙarshen fuskar ramin fitar da waya na zoben ciki da na waje na zoben zamewa).
2. Tsawon da abokin ciniki ya buƙata: L <1000mm, Daidaitaccen L+20mm
L>1000mm, Daidaitaccen L+50mm
L>5000mm, Daidaitaccen L+100mm
