Zoben Zamewa Mai Ƙarfi na Shaft Flange DHS039
Bayanin Zoben Zamewa na Micro Flange na DHS039
Diamita na waje na Ingiant DHS039 Series 39mm, ya ƙunshi tashoshi 1-72 masu daidaitaccen zamewa mai sarrafawa, yana tallafawa siginar da watsawa gauraye na wutar lantarki, yana iya keɓance adadin da'irori da ƙarfin lantarki na yanzu bisa ga samfuran yau da kullun.
Aikace-aikace na yau da kullun
Kayan lantarki na masu amfani da wutar lantarki, jiragen sama marasa matuƙa, na'urorin daidaita wutar lantarki, samfuran jiragen sama, ƙananan jiragen sama, ƙananan robot, ƙaramin CCTV, ƙananan ƙwallo masu sauri, ƙananan PTZ, fitilun dandamali, ƙananan kayan aunawa, da sauransu.
Bayanin Sunayen Samfurin
- (1) Nau'in samfur: DH—zoben zamewa na lantarki
- (2)Hanyar Shigarwa: Zoben zamewa mai ƙarfi na S
- (3) Diamita na waje na zoben zamewa mai ƙarfi: 039-39 mm
- (4)Jimillar da'irori: da'irori 23-23
- (5) Za a yi wa wutar da aka ƙima alama ko kuma ba za a yi mata alama ba idan ta ratsa ta wata wutar da aka ƙima daban don da'irori.
- (6) Gano lamba: --XXX; Domin bambance takamaiman bayanai daban-daban na samfurin iri ɗaya, ana ƙara lambar shaida bayan sunan. Misali: DHS039-23-2A-002 yana da saitin samfura guda biyu masu suna iri ɗaya, tsawon kebul, mahaɗi, hanyar shigarwa, da sauransu sun bambanta, zaku iya ƙara lambar shaida: DHS039-23-2A-002; idan akwai ƙarin wannan samfurin a nan gaba, da sauransu -003, -004, da sauransu.
Zane na Zamewa na Zane na DHS039 Micro Flange Zobe na 2D na Daidaitacce
Idan kuna buƙatar ƙira ƙarin zane na 2D ko 3D, da fatan za a aika bayanai zuwa gare mu ta imel[email protected], injiniyan mu zai yi muku aiki nan ba da jimawa ba, na gode
Sigogi na Fasaha na Zamewa Zoben Ƙaramin Flange na DHS039
| Teburin Matsayin Samfuri | |||
| Matsayin samfurin | Gudun aiki | Rayuwar aiki | |
| Janar | 0~200 rpm | Juyin juya hali miliyan 10 | |
| Masana'antu | 300~1000rpm | Juyin juya hali miliyan 30 | |
| Sigogi na Fasaha | |||
| Fasaha ta lantarki | Fasaha ta injiniya | ||
| Sigogi | darajar | Sigogi | darajar |
| Adadin zobba | Zobe 23 ko Musamman | Zafin aiki | -40℃~+65℃ |
| Matsayin halin yanzu | Zobe 4-20A, Zobe 19-2A | Danshin aiki | %70 |
| Ƙarfin wutar lantarki mai ƙima | 0~240VAC/VDC | Matakin kariya | IP51 |
| Juriyar rufi | ≥100ΜΩ@500VDC | Kayan harsashi | Alloy na Titanium |
| Ƙarfin rufin | 500VAC@50Hz,60s,2mA | Kayan hulɗar lantarki | Karfe masu daraja |
| Darajar canjin juriya mai ƙarfi | ＜5mΩ | Bayanin jagora | 10A tare da AF-0.5 mm², AF-0.15mm²， AFPF-2*0.15mm² |
| Gudun aiki | 0-300rpm | Tsawon gubar | 500mm+20mm |
Teburin Bayani na Wayar Zamewa ta Micro DHS039
| Teburin Bayyana Waya | ||||
| Matsayin halin yanzu | Girman waya (AWG) | Girman mai jagoranci (mm²) | Launin waya | Diamita na waya |
| ≤2A | AWG26# | 0.15 | Ja, rawaya, baƙi, shuɗi, kore, fari, launin ruwan kasa, launin toka, lemu, shunayya, haske, ja, mai haske | Φ1 |
| 3A | AWG24# | 0.2 | Ja, rawaya, baƙi, shuɗi, kore, fari, launin ruwan kasa, launin toka, lemu, shunayya, haske, ja, haske, shuɗi fari, fari ja | Φ1.3 |
| 5A | AWG22# | 0.35 | Ja, rawaya, baƙi, shuɗi, kore, fari, launin ruwan kasa, launin toka, lemu, shunayya, haske, ja, haske, shuɗi fari, fari ja | Φ1.3 |
| 6A | AWG20# | 0.5 | Ja, rawaya | Φ1.4 |
| 8A | AWG18# | 0.75 | Ja, rawaya, baƙi, launin ruwan kasa, kore, fari, shuɗi, launin toka, lemu, shunayya | Φ1.6 |
| 10A | AWG16# | 1.5 | Ja, rawaya, baƙi, launin ruwan kasa, kore, fari | Φ2.0 |
| 15A | AWG14# | 2.00 | Ja, rawaya, baƙi, launin ruwan kasa, kore, fari | Φ2.3 |
| 20A | AWG14# | 2.5 | Ja, rawaya, baƙi, launin ruwan kasa, kore, fari | Φ2.3 |
| 25A | AWG12# | 3.00 | Ja, rawaya, baƙi, shuɗi | Φ3.2 |
| 30A | AWG10# | 6.00 | Ja | Φ4.2 |
| −30A | Yi amfani da wayoyi AWG12# da yawa ko wayoyi masu yawa na AWG10# a layi ɗaya | |||
Bayanin tsawon waya mai gubar:
1.500+20mm (Bukatar gabaɗaya: Auna tsawon waya daga ƙarshen fuskar ramin fitar da waya na zoben ciki da na waje na zoben zamewa).
2. Tsawon da abokin ciniki ya buƙata: L <1000mm, Daidaitaccen L+20mm
L>1000mm, Daidaitaccen L+50mm
L>5000mm, Daidaitaccen L+100mm
