Zamewar Zoben DHK050 Ta Hanyar Bore
Bayanin Zoben Zamewa na DHK050 Ta Hanyar Bore
Ingiant DHK050 Series diamita na waje 120mm da diamita na ramin ciki 50mm, ya ƙunshi tashoshi 1-72 masu daidaitaccen zobe mai ɗaukar hoto, yana tallafawa siginar da watsawa gauraye, yana iya keɓance adadin da'irori da ƙarfin lantarki na yanzu bisa ga samfuran yau da kullun.
Aikace-aikace na yau da kullun
- kebul na reel,
- kayan aikin tsaftace tagogi,
- teburin cin abinci mai juyawa,
- mataki mai juyawa,
- allon juyawa.
Bayanin Sunayen Samfurin
- (1) Nau'in samfur: DH—zoben zamewa na lantarki
- (2) Hanyar Shigarwa: Ramin K-ta hanyar
- (3) Diamita na ramin ramin samfurin: 50-50 mm
- (4)Jimillar da'irori: da'irori 18-18
- (5) Za a yi wa wutar da aka ƙima alama ko kuma ba za a yi mata alama ba idan ta ratsa ta wata wutar da aka ƙima daban don da'irori.
- (6) Gano lamba: --XXX; Domin bambance takamaiman bayanai daban-daban na samfurin iri ɗaya, ana ƙara lambar shaida bayan sunan. Misali: DHK050-18 yana da saitin samfura guda biyu masu suna iri ɗaya, tsawon kebul, mahaɗi, hanyar shigarwa, da sauransu sun bambanta, zaku iya ƙara lambar shaida: DHK050-18-001; idan akwai ƙarin wannan samfurin a nan gaba, da sauransu -003, -004, da sauransu.
Zane na 2D na yau da kullun na DHK050 Ta hanyar Bore Slip Zobe
Idan kuna buƙatar ƙira ƙarin zane na 2D ko 3D, da fatan za a aika bayanai zuwa gare mu ta imel[an kare imel], injiniyan mu zai yi muku aiki nan ba da jimawa ba, na gode
Sigogi na Fasaha na Zamewa Zoben DhK050 Ta Hanyar Bore
| Teburin Matsayin Samfuri | |||
| Matsayin samfurin | Gudun aiki | Rayuwar aiki | |
| Janar | 0~200 rpm | Juyin juya hali miliyan 20 | |
| Masana'antu | 300~1000rpm | Juyin juya hali miliyan 60 | |
| Sigogi na Fasaha | |||
| Fasaha ta lantarki | Fasaha ta injiniya | ||
| Sigogi | darajar | Sigogi | darajar |
| Adadin zobba | Na musamman | Zafin aiki | -40℃~+65℃ |
| Matsayin halin yanzu | 2A, 5A, 10A, 15A, 20A | Danshin aiki | %70 |
| Ƙarfin wutar lantarki mai ƙima | 0~240VAC/VDC | Matakin kariya | IP54 |
| Juriyar rufi | ≥1000ΜΩ@500VDC | Kayan harsashi | Aluminum Alloy |
| Ƙarfin rufin | 1500VAC@50Hz,60s,2mA | Kayan hulɗar lantarki | Karfe masu daraja |
| Darajar canjin juriya mai ƙarfi | <10mΩ | Bayanin jagora | Teflon mai launi |
| Gudun aiki | 0-600rpm | Tsawon gubar | 500mm+20mm |
Teburin Bayanin Wayar Zamewa ta DHK050 Ta Hanyar Bore
| Teburin Bayyana Waya | ||||
| Matsayin halin yanzu | Girman waya (AWG) | Girman mai jagoranci (mm²) | Launin waya | Diamita na waya |
| ≤2A | AWG26# | 0.15 | Ja, rawaya, baƙi, shuɗi, kore, fari, launin ruwan kasa, launin toka, lemu, shunayya, haske, ja, mai haske | Φ1 |
| 3A | AWG24# | 0.2 | Ja, rawaya, baƙi, shuɗi, kore, fari, launin ruwan kasa, launin toka, lemu, shunayya, haske, ja, haske, shuɗi fari, fari ja | Φ1.3 |
| 5A | AWG22# | 0.35 | Ja, rawaya, baƙi, shuɗi, kore, fari, launin ruwan kasa, launin toka, lemu, shunayya, haske, ja, haske, shuɗi fari, fari ja | Φ1.3 |
| 6A | AWG20# | 0.5 | Ja, rawaya | Φ1.4 |
| 8A | AWG18# | 0.75 | Ja, rawaya, baƙi, launin ruwan kasa, kore, fari, shuɗi, launin toka, lemu, shunayya | Φ1.6 |
| 10A | AWG16# | 1.5 | Ja, rawaya, baƙi, launin ruwan kasa, kore, fari | Φ2.0 |
| 15A | AWG14# | 2.00 | Ja, rawaya, baƙi, launin ruwan kasa, kore, fari | Φ2.3 |
| 20A | AWG14# | 2.5 | Ja, rawaya, baƙi, launin ruwan kasa, kore, fari | Φ2.3 |
| 25A | AWG12# | 3.00 | Ja, rawaya, baƙi, shuɗi | Φ3.2 |
| 30A | AWG10# | 6.00 | Ja | Φ4.2 |
| −30A | Yi amfani da wayoyi AWG12# da yawa ko wayoyi masu yawa na AWG10# a layi ɗaya | |||
Bayanin tsawon waya mai gubar:
1.500+20mm (Bukatar gabaɗaya: Auna tsawon waya daga ƙarshen fuskar ramin fitar da waya na zoben ciki da na waje na zoben zamewa).
2. Tsawon da abokin ciniki ya buƙata: L <1000mm, Daidaitaccen L+20mm
L>1000mm, Daidaitaccen L+50mm
L>5000mm, Daidaitaccen L+100mm
Kayayyakin da Ingiant ya ba da shawarar jerin DHK050
| Lambar Abu | Lambar Zobe | Tsawon 2A | Tsawon 5A | Tsawon 10A | Tsawon 15A | Tsawon 20A | Tsawon 25A |
| DHK050-6 | 6 | 42.4 | 43.6 | 45.4 | 48.4 | 51.4 | 54.4 |
| DHK050-12 | 12 | 54.4 | 56.8 | 60.4 | 66.4 | 72.4 | 78.4 |
| DHK050-18 | 18 | 66.4 | 70 | 75.4 | 84.4 | 93.4 | 102.4 |
| DHK050-24 | 24 | 78.4 | 83.2 | 90.4 | 102.4 | 114.4 | 126.4 |
| DHK050-30 | 30 | 90.4 | 96.4 | 105.4 | 120.4 | 135.4 | - |
| DHK050-36 | 36 | 102.4 | 109.6 | 120.4 | 138.4 | 156.4 | - |
| DHK050-42 | 42 | 114.4 | 122.8 | - | - | - | - |
| DHK050-48 | 48 | 126.4 | 136 | - | - | - | - |
| DHK050-54 | 54 | 138.4 | 149.2 | - | - | - | - |
| DHK050-60 | 60 | 150.4 | 162.4 | - | - | - | - |
| DHK050-66 | 66 | 162.4 | 175.6 | - | - | - | - |
| DHK050-72 | 72 | 174.4 | 188.8 | - | - | - | - |
Bayanin Mai Gudanarwa: 2A tare da mai gudanar da Teflon mai launi AWG26#, 5A tare da mai gudanar da Teflon mai launi AWG22#
10A yana amfani da na'urar sarrafa Teflon mai launi AWG18# (ko kuma na'urar sarrafa PVC mai launi mai sassauƙa AWG16#)
15A yana amfani da na'urar sarrafa Teflon mai launi ta AWG16# (ko kuma na'urar sarrafa PVC mai launi mai sassauƙa ta AWG14#)
20A yana amfani da na'urar sarrafa Teflon mai launi ta AWG14#.
Tsawon haɗuwar samfur tare da adadin tashoshi na daban-daban (n2, n5, n10, n15, n20) (mm):
L=15.4+2*n2+2.2*n5+2.5*n10+3*n15+3.5*n20
