Zoben Zamewa na Flange DHS150
Bayanin Zamewar Zoben Flange na DHS150
Diamita na waje na Ingiant DHS150 Series 150mm, ya ƙunshi tashoshi 1-96 masu daidaitaccen zamewa mai sarrafawa, yana goyan bayan siginar da watsawa gauraye na wutar lantarki, yana iya keɓance adadin da'irori da ƙarfin lantarki na yanzu bisa ga samfuran yau da kullun.
Aikace-aikace na yau da kullun
Cibiyar sarrafa injinan masana'antu, teburin juyawa, hasumiyar kayan aiki mai nauyi, kebul na reel, kayan marufi, kama maganadisu, kayan aikin sarrafa tsari, firikwensin juyawa, kayan aikin hasken gaggawa, robot, kayan aikin baje koli/nunawa, kayan aikin likita, ƙofar juyawa, da sauransu.
Bayanin Sunayen Samfurin
- (1) Nau'in samfur: DH—zoben zamewa na lantarki
- (2)Hanyar Shigarwa: Zoben zamewa mai ƙarfi na S
- (3) Diamita na waje na zoben zamewa mai ƙarfi na shaft: 150-150 mm
- (4)Jimillar da'irori: da'irori 73-73
- (5) Za a yi wa wutar da aka ƙima alama ko kuma ba za a yi mata alama ba idan ta ratsa ta wata wutar da aka ƙima daban don da'irori.
- (6) Gano lamba: --XXX; Domin bambance takamaiman bayanai daban-daban na samfurin iri ɗaya, ana ƙara lambar shaida bayan sunan. Misali: DHS150-73-30A-002 yana da saitin samfura guda biyu masu suna iri ɗaya, tsawon kebul, mahaɗi, hanyar shigarwa, da sauransu sun bambanta, zaku iya ƙara lambar shaida: DHS150-73-30A-002; idan akwai ƙarin wannan samfurin a nan gaba, da sauransu -003, -004, da sauransu.
Zane na Zamewa na DHS150 Flange 2D na Daidaitacce
Idan kuna buƙatar ƙira ƙarin zane na 2D ko 3D, da fatan za a aika bayanai zuwa gare mu ta imel[an kare imel], injiniyan mu zai yi muku aiki nan ba da jimawa ba, na gode
Sigogi na Fasaha na Zamewar Zoben Flange na DHS150
| Teburin Matsayin Samfuri | |||
| Matsayin samfurin | Gudun aiki | Rayuwar aiki | |
| Janar | 0~200 rpm | Juyin juya hali miliyan 10 | |
| Masana'antu | 300~1000rpm | Juyin juya hali miliyan 50 | |
| Sigogi na Fasaha | |||
| Fasaha ta lantarki | Fasaha ta injiniya | ||
| Sigogi | darajar | Sigogi | darajar |
| Adadin zobba | Zobe 73 ko Musamman | Zafin aiki | -40℃~+65℃ |
| Matsayin halin yanzu | Zobe 1-30A, zobe 10A/28, Sauran -5A | Danshin aiki | %70 |
| Ƙarfin wutar lantarki mai ƙima | 0~380VAC/240VDC | Matakin kariya | IP54 |
| Juriyar rufi | ≥1000ΜΩ@500VDC | Kayan harsashi | Aluminum Alloy |
| Ƙarfin rufin | 2000VAC@50Hz,60s,2mA | Kayan hulɗar lantarki | Karfe masu daraja |
| Darajar canjin juriya mai ƙarfi | <10mΩ | Bayanin jagora | AWG12#,AWG16#,AWG22# |
| Gudun aiki | 0-300rpm | Tsawon gubar | 500mm+20mm |
Teburin Bayani na Wayar Zamewa ta DHS150 Flange
| Teburin Bayyana Waya | ||||
| Matsayin halin yanzu | Girman waya (AWG) | Girman mai jagoranci (mm²) | Launin waya | Diamita na waya |
| ≤2A | AWG26# | 0.15 | Ja, rawaya, baƙi, shuɗi, kore, fari, launin ruwan kasa, launin toka, lemu, shunayya, haske, ja, mai haske | Φ1 |
| 3A | AWG24# | 0.2 | Ja, rawaya, baƙi, shuɗi, kore, fari, launin ruwan kasa, launin toka, lemu, shunayya, haske, ja, haske, shuɗi fari, fari ja | Φ1.3 |
| 5A | AWG22# | 0.35 | Ja, rawaya, baƙi, shuɗi, kore, fari, launin ruwan kasa, launin toka, lemu, shunayya, haske, ja, haske, shuɗi fari, fari ja | Φ1.3 |
| 6A | AWG20# | 0.5 | Ja, rawaya | Φ1.4 |
| 8A | AWG18# | 0.75 | Ja, rawaya, baƙi, launin ruwan kasa, kore, fari, shuɗi, launin toka, lemu, shunayya | Φ1.6 |
| 10A | AWG16# | 1.5 | Ja, rawaya, baƙi, launin ruwan kasa, kore, fari | Φ2.0 |
| 15A | AWG14# | 2.00 | Ja, rawaya, baƙi, launin ruwan kasa, kore, fari | Φ2.3 |
| 20A | AWG14# | 2.5 | Ja, rawaya, baƙi, launin ruwan kasa, kore, fari | Φ2.3 |
| 25A | AWG12# | 3.00 | Ja, rawaya, baƙi, shuɗi | Φ3.2 |
| 30A | AWG10# | 6.00 | Ja | Φ4.2 |
| −30A | Yi amfani da wayoyi AWG12# da yawa ko wayoyi masu yawa na AWG10# a layi ɗaya | |||
Bayanin tsawon waya mai gubar:
1.500+20mm (Bukatar gabaɗaya: Auna tsawon waya daga ƙarshen fuskar ramin fitar da waya na zoben ciki da na waje na zoben zamewa).
2. Tsawon da abokin ciniki ya buƙata: L <1000mm, Daidaitaccen L+20mm
L>1000mm, Daidaitaccen L+50mm
L>5000mm, Daidaitaccen L+100mm
