Zoben Zamewa na Flange DHS030
Bayanin Zoben Zamewa na DHS030 Micro Flange
Diamita na waje na Ingiant DHS030 Series 30 mm, ya ƙunshi tashoshi 1-72 masu daidaitaccen zamewa mai sarrafawa, yana tallafawa siginar da watsawa gauraye na wutar lantarki, yana iya keɓance adadin da'irori da ƙarfin lantarki na yanzu bisa ga samfuran yau da kullun.
Aikace-aikace na yau da kullun
UAV, mai daidaita yanayi, samfurin jirgin sama, ƙananan jiragen sama, ƙaramin robot, ƙaramin CCTV, ƙaramin ƙwallon gudu mai sauri, ƙaramin PTZ, hasken mataki, ƙananan kayan aikin aunawa da sauran masana'antu
Bayanin Sunayen Samfurin
- (1) Nau'in samfur: DH—zoben zamewa na lantarki
- (2)Hanyar Shigarwa: Zoben zamewa mai ƙarfi na S
- (3) Diamita na waje na zoben zamewa mai ƙarfi na shaft: 030-30 mm
- (4)Jimillar da'irori: da'irori 6-6
- (5) Za a yi wa wutar da aka ƙima alama ko kuma ba za a yi mata alama ba idan ta ratsa ta wata wutar da aka ƙima daban don da'irori.
- (6) Gano lamba: --XXX; Domin bambance takamaiman bayanai daban-daban na samfurin iri ɗaya, ana ƙara lambar shaida bayan sunan. Misali: DHS030-6-10A-002 yana da saitin samfura guda biyu masu suna iri ɗaya, tsawon kebul, mahaɗi, hanyar shigarwa, da sauransu sun bambanta, zaku iya ƙara lambar shaida: DHS030-6-10A-002; idan akwai ƙarin wannan samfurin a nan gaba, da sauransu -003, -004, da sauransu.
Zane na Zamewa na Zane na DHS030 Micro Flange na 2D
Idan kuna buƙatar ƙira ƙarin zane na 2D ko 3D, da fatan za a aika bayanai zuwa gare mu ta imel[an kare imel], injiniyan mu zai yi muku aiki nan ba da jimawa ba, na gode
Sigogi na Fasaha na Zamewa Zoben Ƙaramin DHS030
| Teburin Matsayin Samfuri | |||
| Matsayin samfurin | Gudun aiki | Rayuwar aiki | |
| Janar | 0~200 rpm | Juyin juya hali miliyan 10 | |
| Masana'antu | 300~1000rpm | Juyin juya hali miliyan 30 | |
| Sigogi na Fasaha | |||
| Fasaha ta lantarki | Fasaha ta injiniya | ||
| Sigogi | darajar | Sigogi | darajar |
| Adadin zobba | Zobe 42 ko na Musamman | Zafin aiki | -40℃~+65℃ |
| Matsayin halin yanzu | Zoben 7-10A, Zoben 2-3A, 1-Gigabit Ethernet | Danshin aiki | %70 |
| Ƙarfin wutar lantarki mai ƙima | 0~240VAC/VDC | Matakin kariya | IP51 |
| Juriyar rufi | ≥500ΜΩ@500VDC | Kayan harsashi | Bakin karfe |
| Ƙarfin rufin | 500VAC@50Hz,60s,2mA | Kayan hulɗar lantarki | Karfe masu daraja |
| Darajar canjin juriya mai ƙarfi | <10mΩ | Bayanin jagora | 10A tare da AF-0.35 mm², AF-0.25mm² |
| Gudun aiki | 0-300rpm | Tsawon gubar | 500mm+15mm |
Teburin Bayani na Wayar Zamewa ta Micro DHS030
| Teburin Bayyana Waya | ||||
| Matsayin halin yanzu | Girman waya (AWG) | Girman mai jagoranci (mm²) | Launin waya | Diamita na waya |
| ≤2A | AWG26# | 0.15 | Ja, rawaya, baƙi, shuɗi, kore, fari, launin ruwan kasa, launin toka, lemu, shunayya, haske, ja, mai haske | Φ1 |
| 3A | AWG24# | 0.2 | Ja, rawaya, baƙi, shuɗi, kore, fari, launin ruwan kasa, launin toka, lemu, shunayya, haske, ja, haske, shuɗi fari, fari ja | Φ1.3 |
| 5A | AWG22# | 0.35 | Ja, rawaya, baƙi, shuɗi, kore, fari, launin ruwan kasa, launin toka, lemu, shunayya, haske, ja, haske, shuɗi fari, fari ja | Φ1.3 |
| 6A | AWG20# | 0.5 | Ja, rawaya | Φ1.4 |
| 8A | AWG18# | 0.75 | Ja, rawaya, baƙi, launin ruwan kasa, kore, fari, shuɗi, launin toka, lemu, shunayya | Φ1.6 |
| 10A | AWG16# | 1.5 | Ja, rawaya, baƙi, launin ruwan kasa, kore, fari | Φ2.0 |
| 15A | AWG14# | 2.00 | Ja, rawaya, baƙi, launin ruwan kasa, kore, fari | Φ2.3 |
| 20A | AWG14# | 2.5 | Ja, rawaya, baƙi, launin ruwan kasa, kore, fari | Φ2.3 |
| 25A | AWG12# | 3.00 | Ja, rawaya, baƙi, shuɗi | Φ3.2 |
| 30A | AWG10# | 6.00 | Ja | Φ4.2 |
| −30A | Yi amfani da wayoyi AWG12# da yawa ko wayoyi masu yawa na AWG10# a layi ɗaya | |||
Bayanin tsawon waya mai gubar:
1.500+20mm (Bukatar gabaɗaya: Auna tsawon waya daga ƙarshen fuskar ramin fitar da waya na zoben ciki da na waje na zoben zamewa).
2. Tsawon da abokin ciniki ya buƙata: L <1000mm, Daidaitaccen L+20mm
L>1000mm, Daidaitaccen L+50mm
L>5000mm, Daidaitaccen L+100mm
